Posts Tagged ‘several’

BB18¼ Class

Thursday, April 15th, 2010
Total Number of Engines Built 55
First Engine Built 1950
Last Engine Built 1958
First Engine Written Off 1967
Last Engine Written Off 1970
Number of Engines in Class on the Books as at:
31/12/50 31/12/60 31/12/66 31/12/67 31/12/68 31/12/69 31/12/70
55 55 53 44 11
Number of Engines in Class in Service as at:
31/12/67 31/12/68 7/10/69
37 17 10

Notes

This design was an improvement on earlier successful B18¼ incorporating modern appliances. Some modifications to the original design were suggested by Vulcan Foundry and subsequently adopted. A number of features, including the mounting of WH pump on fireman’s side, stainless steel rather than brass boiler bands, SCOA-P coupled wheels and pressed steel sand box, distinguished these engines from the earlier B18¼ class. Engines constructed by Walkers Limited used electricity for the light on the rear of the tender, for side lamps and to illuminate the motion. All were fitted with Roller Bearings and chime whistles. The engines were painted green when introduced.

The first batch was constructed by Vulcan Foundry and the last 20 by Walkers Ltd, Maryborough. Contracts were let to both manufacturers in 1948 but Walkers did not deliver its first engine until 1955 due to shortages of materials. Delays in these deliveries resulted in the last of the order, N°1089, not entering service until March 1958 and thus becoming the last mainline steam locomotive to be built and placed in service in Australia. In fact Walkers had delivered some diesels to QR before completing this order.

Several members of the class that were overhauled in the final years were repainted black. In the 1950’s a “standard” boiler was designed to be suitable for both this class and B18¼ engines.

They proved to be a most successful design and were popular with crews. Initially they were used on mail trains, long distance passenger and goods trains and northside suburban services. The introduction of diesels saw them gradually relegated to lesser duties and ultimately cut short their careers.

Last engines in service were N°1012, 1030, 1037, 1039, 1070, 1073, 1081 and 1084 at Mackay and N°1088 at Ipswich.

Abbreviations

Vulcan – Vulcan Foundry, Newton-le-Willows, Lancs.,
Walkers – Walkers Limited, Engineers, Maryborough, Qld
ZZR – Zig Zag Railway Lithgow NSW

B18¼ Class

Thursday, April 15th, 2010
Total Number of Engines Built 83
First Engine Built 1926
Last Engine Built 1947
First Engine Written Off 1967
Last Engine Written Off 1970
Number of Engines in Class on the Books as at:
31/12/20 31/12/30 31/12/40 31/12/50 31/12/60 31/12/66 31/12/67 31/12/68 31/12/69 31/12/70
17 53 83 83 83 70 43 8
Number of Engines in Class in Service as at:
31/12/67 31/12/68 7/10/69
50 12 2

Notes

The engines were designed to haul Mail Trains and were the principal engines used on these services until the introduction of the BB18¼ and diesels. Nevertheless, they spent much of their working lives on goods trains and suburban passenger workings. They were generally popular with crews and had free-steaming boilers.

A prototype engine, N°84, was constructed by Ipswich Workshops and ran to Grandchester on 16th July 1926. After successful trails on both the Sydney and Townsville Mail Trains, approval was granted in 1927 to construct a further eight engines at Ipswich and another eight were ordered in 1929. A proposal to fit a Franklin booster to the trailing truck was rejected. These first seventeen engines were constructed with open cabs and C16 style tenders. Six engines built in 1935 were the first to be fitted with sedan cabs but retained old style tenders. Commencing with N°841 in 1936, all engines were built to what was considered the “standard” B18¼ design with sedan cabs, new style tenders and larger 9½” diameter piston valves.

A number of modifications were carried out during their lives. The 1935 engines were fitted with MeLeSco multiple valve regulators mounted on the superheater header. These were later replaced with standard regulators in the boiler dome. N° 843 was fitted with an ACFI feed water heater when it entered service in 1936 but had it removed in 1942. Early engines were fitted with Alligator crossheads. The Laird type was used on those constructed at Ipswich in 1939 commencing with N°870. Minor changes were made to boilers over the years. A few engines acquired BB18¼ boilers during overhaul and later a “standard” boiler was designed for use by both classes. All B18¼ chimneys were cast with capuchions, but several were later ground off due damage in service.

All members of the class were painted green commencing with N°50 & N°911 in 1949; however, several engines that were overhauled in the final years were repainted black. N°895 was the first of the class to have its headlight moved to a bracket in the centre of the smokebox door. Most other members of the class were similarly altered.

The last two engines in service were N°770 at Mackay and N°842 at Ipswich.

N°84 attained the highest mileage of any QR steam engine, travelling 1,472,859 miles during its life of 42¼ years.

~ Some tenders types were exchanged during service
* Engines constructed since 1936 (N°841 onwards)
** Engines constructed since 1939
# Some WH pumps later changed when engines underwent boiler exchanges.

Abbreviations

Ipswich – Ipswich Railway Workshops
Walkers – Walkers Ltd, Engineers, Maryborough